Product Information
Good Point
B-FACE™ A1000 is AR Film with a PET (polyethylene terephthalate) film base featuring high optical performance. It has colorless reflection and transmittance in addition to high anti-reflection performance.
B-FACE™ A1000 has a pressure sensitive adhesive (PSA) layer on the backside of the base film for lamination on flat panel displays and various other uses.
Data
| Optical Characteristic | |
| Reflectance | 0.5 % |
| Minimum reflectance | 0.2 % |
| Total transmittance | 94 % |
| Haze | 0.6 % |
| Physical Characteristic | |
| Surface resistivity | 2×109  /  |
| Pencil hardness | 2H |
| Scratch resistance (Steel fiber #0000) |
200gf load 10 Strokes good |
| Chemical Characteristic *) | |
| 0.1%NaOH | No notable change |
| 1%HCl | |
| 3%NaCl | |
| Ethyl alcohol | |
| Durability | |
| Heat resistance (80ºC×500hr) |
No notable change |
| Humidity resistance (60ºC 90%Rh×500hr) |
|
| Heat cycle**) (-10⇔65ºC×50times) |
|
-10ºC (60minutes) ⇔ 65ºC (60minutes)
***The values given above are typical results measured at our laboratory and are not guaranteed.
Spectrum data
* The values given above are typical results measured at laboratory and are not guaranteed.
Product architecture
* The values given above are typical results measured at our laboratory and are not guaranteed.